Gromtech Effects

Blog · 5 November 2026

Human Gear Animato, the Rare Japanese Bass Fuzz Explained

Sooner or later, anyone trying to work out Chris Wolstenholme's bass sound on Muse's 2000s records runs into the Human Gear Animato. It's a small-run Japanese distortion pedal with three knobs, DIST, TONE and VOL, and it sounds thick, with an aggressive top end and loads of attack. It's also a pain to find.

So here's what the pedal is, why bass players care so much, where it sat in Chris's rig, and how to run a fuzz like it on bass without throwing away your bottom end.

What is the Human Gear Animato?

Human Gear is a Japanese boutique builder. Equipboard lists them as a Tokyo-based maker that only builds overdrive and distortion pedals, most named with Italian musical terms like Animato and Vivace.

Still in production? Depends who you ask, because sources disagree. MuseWiki calls it rare and discontinued, and a TalkBass thread says the builder no longer makes them. Then again, Japanese retailers like Ikebe Gakki have listed new units in recent years, and a few Reverb sellers have new old stock. Realistically you're buying from a Japanese shop or second-hand, at whatever the market wants that month. It isn't cheap.

People can't even agree on what to call it. Some listings say distortion, some say fuzz. I go with fuzz, and I can tell you exactly why. Back in 2014 I sold the first physical clone I ever built, to a bassist who gigged and recorded with it, and that player always called it a fuzz. It's stuck with me ever since. It suits the sound, too: on bass it's dense and compressed with plenty of grind.

The controls

Not much to it.

  • DIST runs from a rough edge up to full, sustaining fuzz, and the character shifts as you go, not just the amount.
  • TONE sweeps from thick and dark to bright and cutting.
  • VOL is output.

No blend, and no gate. That turns out to matter, as you'll see further down.

Why bass players hunt for it

Partly the sound. Plenty of bass fuzzes either thin out the low end or turn the whole thing to mush. The Animato has a reputation for a forward, treble-heavy attack that still cuts through when the band is loud.

Mostly, though, it's Muse.

In a 2010 Dunlop TV interview filmed backstage at the Oakland Arena, Shane Goodwin, then the band's bass tech, walked through Chris's rig. The interviewer pointed at the Animato on the board, and Shane said:

That is Chris's sound. If you hear pretty much anything off the last four records, this is what you're basically hearing.

As for where it came from, "It's just something Chris stumbled on in a Japanese shop." The crew's answer was to stock up. In his words, "we basically got as many as we could", and "We ended up having three over here. I've got a couple of spares there."

A tech doesn't carry spares of a pedal unless the rig falls apart without it.

Where it sat in Chris's rig

It never worked alone. Chris ran several amps at once and the Animato had one to itself. Talking to Bryan Beller in 2009, around the time of The Resistance, he put it like this:

My normal, most-used sound would be amp 1 being clean, amp 2 with the Big Muff, and amp 3 with the Animato pedal.

The equipment list printed with that interview names three Marshall DBS 7400 heads. A single effects loop feeds all three amps, with an octave, a delay unit and a Big Muff among its pedals. Amp 2 gets its own loop with a Big Muff, an Animato and several other fuzzes, and amp 3 has one with a Big Muff, an Animato and a set of filter and synth pedals. Chris also explained why amp 1 stays clean, "when you use distortion, you use a lot of bottom end", so distortion was kept off amp 1 to protect the low end.

Rich Costey, who recorded the band in that period, said much the same in a 2024 Gearspace Q&A when he was asked about the bass on "Hysteria":

Chris at that time had three entire marshall amp rigs: one for clean, one for Big Muff, and one for his Animato pedal. The clean and muff were on all the time, the Animato was only turned on for extra distortion and teeth.

"Extra distortion and teeth" sums the pedal up better than I could. It's not the foundation. It sits over a clean low end and a Big Muff and gives the note its bite. Worth knowing too that Costey says much of the bass on "Hysteria" is a synth patch he programmed on a Kyma system, doubling Chris's part, so on that record the pedal is only one piece of the puzzle.

For the full three-amp picture, our Muse bass rig page goes through it amp by amp, and the black Russian Big Muff post covers the other fuzz in the chain.

Using a fuzz like this on bass

This goes for the Animato and for most aggressive bass fuzzes. It's what's worked for me playing and recording, not anybody's published settings.

First in the chain

Fuzz reacts to your hands, and it does that best when it's getting the raw signal straight off the instrument. So put it before compressors, EQ and any amp or cab sim. Stick a compressor in front and the dynamics are flattened before the fuzz ever sees them. It sounds flat, because it is.

Keep a clean signal underneath

If you change one thing, change this. Fuzz on its own loses the fundamental, and a bass part with no fundamental stops holding the song up. Chris's rig got around that with a dedicated clean amp running alongside the dirty ones, and you can do the same thing on a much smaller budget.

On a pedalboard, a blend pedal or a dual-output preamp does it, one side clean and the other through the fuzz. In a DAW it's even easier. Duplicate the DI, put the fuzz on one copy and a clean amp or preamp on the other, and balance them on the faders. Low-pass the clean track a touch and high-pass the fuzz track a touch, and they'll quit fighting each other.

Let the clean signal carry the weight, then bring the fuzz up until the attack pokes through. It's nearly always less fuzz than you'd expect. My pet peeve, honestly, is bass players setting the fuzz soloed at full whack and then wondering why the band sounds thin.

Gate gently

High-gain fuzz on bass hisses between notes. A heavy gate fixes that and creates a new problem, chopping off note tails so sustained notes sound choppy. Set the threshold just above the noise floor, with a fairly quick attack and a release slow enough that notes can die away on their own.

Somewhere to start

For rhythm grind under a busy mix, I'd go DIST around half, TONE just past noon, VOL matched to bypass, with plenty of clean in the blend.

When a riff has to carry the song on its own, push DIST most of the way up and keep TONE at or a little under noon so the top doesn't fizz. Clean still underneath.

Lead-style lines high on the neck can take DIST high, TONE brighter and less clean in the blend.

Before you touch any of those knobs, though, try switching pickups. Bridge pickup into a bright fuzz gets very nasal very fast. Sometimes that's exactly what the part wants.

Add the octave

The other half of this sound is an octave pedal. Shane Goodwin described the two fuzzes on Chris's board as "basically sound with a big splash of octave". Our Boss OC-2 post gets into how an analogue octave tracks and how to pair one with fuzz.

The plugin route, Aminato

Can't get hold of a real Animato, or want the sound inside your DAW? We make Aminato, a plugin recreation of the Human Gear Animato. We built it from two physical Animato pedals and kept comparing it against the hardware, across the full range of every knob, until it responded the way the pedals do. It's not the pedal itself, but it's as close as we could get with two of them sitting on the bench.

You get the pedal's DIST, TONE and VOL, plus the two things a recording needs and the pedal lacks. BLEND mixes your clean bass back in, and GATE shuts the hiss between notes without cutting their tails off. Put it first on the DI track, ahead of any amp or cab sim. It runs on Windows and Mac as VST3, CLAP and Audio Unit.

No plugin or pedal will make you sound exactly like a record, and anyone promising that is selling something (yes, I see the irony). The Muse sound came from Chris's hands, his basses, three amps, the mics and the room. A fuzz set up properly with clean low end underneath still gets you a long way.

Getting the sound

A small Japanese pedal with three knobs ended up at the centre of one of rock's best-known bass sounds. Put it first, keep clean underneath, gate it gently. And if the used market isn't your idea of fun, Aminato puts it on your DI track.

Gromtech Effects is not affiliated with, sponsored by or endorsed by Human Gear, Muse, Chris Wolstenholme, Rich Costey, Shane Goodwin, Dunlop, Marshall or Electro-Harmonix. Names are used only to describe the music and the hardware.

Sources

Try it: Aminato

Our recreation of the Human Gear Animato bass fuzz. US$27, one payment, Windows and Mac.

More from the blog